Are you a Fitbit user? If so, you may be familiar with the water lock feature. This feature is designed to prevent your Fitbit from being damaged by water. In this blog post, we’ll show you how to use the water lock on your Fitbit.
What is the water lock feature?
Table of Contents
ToggleThe water lock feature on the Fitbit is a great way to keep your tracker dry and protected when you’re swimming or doing other activities where it might get wet. When the water lock is enabled, the tracker will be sealed and any button presses will be ignored. This means that you won’t accidentally start or stop a workout, or change any settings. To use a water lock, simply enable it before you start your activity. When you’re finished, press and hold the button to exit water lock mode and allow the tracker to dry.
How to use water lock on your Fitbit.
Water Lock is a feature on your Fitbit that prevents the screen from turning on when it gets wet. This is especially useful when you’re swimming or doing another water-based activity. Here’s how to use it:
1. Make sure your Fitbit is dry before you begin.
2. Go into the settings menu and select “Water Lock.”
3. Once you’ve turned on Water Lock, the screen will stay off even if it gets wet. To turn it off, simply press and hold the button on your Fitbit until you see the ‘Lock’ icon disappear.
Why you should use water lock on your Fitbit.
If you’re a fan of Fitbits, you probably already know about the water lock feature. But just in case you’re not familiar with it, a water lock is a great way to make sure your Fitbit stays water-resistant. By locking the device, you can prevent any water from getting inside and damaging it.
So why should you use a water lock on your Fitbit? There are a few good reasons:
1. It will prolong the life of your Fitbit.
2. It will prevent accidental button presses (which can often happen when you’re sweating).
3. It will keep your Fitbit working properly in all conditions (including wet ones).
Overall, using a water lock on your Fitbit is a good way to protect your investment and keep it working like new. So next time you go for a swim or a workout, be sure to lock it up!
Tips for using water lock on your Fitbit.
Water lock is a great feature on the Fitbit that can help you keep track of your water intake and make sure you’re drinking enough water throughout the day. Here are some tips for using a water lock on your Fitbit:
1. Make sure to set a water goal in the Fitbit app. This will help you keep track of how much water you should be drinking each day.
2. Use the water lock feature when you’re drinking water. This will ensure that your Fitbit is tracking your water intake.
3. Make sure to unlock your Fitbit after you’re done drinking water. This will ensure that your Fitbit is accurate in tracking your steps and other activity.
Following these tips will help you make the most out of the water lock feature on your Fitbit.
How to remove the water lock from your Fitbit.
Water Lock is a feature on your Fitbit that helps to prevent your device from being damaged by water. When Water Lock is enabled, your device will be locked and the screen will not respond to any touches. This can help to protect your device from accidental presses when you are swimming or showering. To remove Water Lock from your device, simply press and hold the button on your device for 3 seconds.
How to turn off the water lock.
If you’re like most people, you probably don’t spend a lot of time thinking about your Fitbit. But if you’re a swimmer or you live in a hot climate, you may be wondering what the water lock feature is and how to use it.
The water lock feature is designed to prevent your Fitbit from being damaged by water. When it’s turned on, the device will be locked and the screen will be disabled. This means that you won’t be able to see your stats or the time, but you will still be able to track your activity.
To turn on the water lock, go to the Fitbit app and tap the Today tab. Then, tap the Accounts icon and select your device. Next, tap the device image and scroll down to the bottom of the screen. Tap the toggle next to Water Lock to turn it on.
Now, when you go for a swim, you won’t have to worry about your Fitbit getting wet. And when you’re done, you can simply turn off the water lock by holding down the button on your device for three seconds.
Wrap up.
The water lock feature on your Fitbit is a great way to keep your tracker safe and dry when you’re swimming or working out in the rain. Here’s how to use it:
1. To turn on the water lock, press and hold the button on your tracker for three seconds.
2. Your tracker will vibrate and the screen will turn off.
3. To turn off the water lock, press and hold the button again for three seconds. Your tracker will vibrate and the screen will turn on.
It’s that easy! Now you can swim worry-free knowing that your Fitbit is safe and dry.